All Categories - Suzhou Deyuancheng auto parts.Co., Ltd

Shock absorbers

Steering gear

The function of the steering gear is to appropriately transform the steering torque and steering angle from the steering wheel (mainly deceleration and torque increase), and then output it to the steering rod mechanism to turn the car. Therefore, the steering gear is essentially a deceleration transmission device. There are many types of steering gears, such as rack and pinion type, recirculating ball type, worm crank finger-pin type, power steering gear, etc.

Wipers

Car wipers are an important accessory installed on the windshield. Their function is to remove rain, snow and dust on the windshield that obstruct the view. Therefore, it plays an important role in driving safety. Wipers generally include vacuum wipers, electric wipers and wipers with electronic control units.

Engine crankshaft

The crankshaft is the most important component of the engine. It takes the force from the connecting rod and converts it into torque, which is output through the crankshaft and drives other accessories on the engine. The crankshaft is affected by the centrifugal force of the rotating mass, the periodically changing gas inertia force and the reciprocating inertia force, causing the crankshaft to be subject to bending and torsional loads.

Steering Pump

The function of the car's power steering pump is to assist the driver in adjusting the direction of the car and reduce the intensity of steering wheel steering. By adjusting the flow speed of the steering assist oil, it plays a power-assisting role, making it easier for the driver to turn the steering wheel and reducing the need for steering wheel steering. The intensity used reduces driving fatigue.

Engine Parts

The automobile engine is the most important part of the automobile structure. It determines the power, economy and environmental protection of the automobile. We carry engine parts such as spark plugs, valves, pistons, piston rings and connecting rods.

Ball joint

The automobile ball joint is an important component in the automobile suspension system. It is usually installed between the wheel and the body or axle. Its main function is to ensure that the connection between the wheels and the body is stable and can rotate smoothly when the vehicle is driving. There is a ball joint inside the ball head so that the wheel can rotate freely within a certain range.

Control arms and wishbones

The automobile control arm is an important component of the automobile suspension system. Its core function is to effectively transmit various forces on the wheels to the body and ensure that the wheels move according to the predetermined trajectory. Through ball joints or bushings, the control arm achieves an elastic connection between the wheel and the body. It also needs to have sufficient stiffness, strength and service life to cope with various driving conditions.

Link stabilizer

Car link stabilizers, especially lateral stabilizers, mainly improve vehicle stability and control by reducing the roll or roll of the vehicle when driving in corners or making sharp turns. ‌When the body only moves vertically and the suspension deformations on both sides are equal, the stabilizer bar rotates freely in the sleeve and the stabilizer bar does not work.

High pressure fuel pump

The function of the automobile high-pressure fuel pump is to increase fuel pressure, high-pressure injection, and achieve atomization effects. The high-pressure oil pump is mainly used as the power source for hydraulic devices such as jacks, heading machines, extruders, and flower binding machines.

Coil spring

The main function of a car coil spring is to cushion and maintain contact between the tire and the ground. The classification of coil springs includes compression type, tension type and torsion type, which are classified according to the load characteristics during operation. They can also be divided into cylindrical coil springs and variable diameter coil springs according to structural characteristics, with the latter mainly used to withstand compressive loads.

Fuel injector

The purpose of the automobile fuel injector is to coordinate the ignition time of the valve mechanism and inject gasoline into the cylinder regularly and quantitatively for combustion. The quality of the fuel injector affects the degree of atomization of the fuel. The higher the degree of atomization, the lower the combustion efficiency of the vehicle. The higher.

Engine cylinder head

The cylinder head is a valve mechanism in an internal combustion engine. It is mainly used to close the upper part of the cylinder to form the combustion chamber. It also serves as a support for the camshaft, rocker arm shaft and intake and exhaust pipes. It is mainly used to suck air into the inside of the cylinder, and the spark plug The combustible mixed gas is ignited, driving the piston to do work, and the exhaust gas is discharged from the exhaust pipe.

Control arm rubber sleeve

The main function of the automobile control arm rubber sleeve is to provide cushioning and shock-absorbing effects, while reducing noise, vibration and harshness (NVH), and preventing rigid connection with the car body. ‌

Shock absorbers

Radiators

The automobile radiator consists of three parts: the water inlet chamber, the water outlet chamber and the radiator core. Coolant flows inside the radiator core and air passes outside the radiator. The hot coolant becomes cold by losing heat to the air, and the cold air heats up by absorbing the heat given off by the coolant. We provide more than 500 SKUs of vehicle radiators on the market, covering Volkswagen, Audi, BMW, Honda, Toyota, Nissan, Chevrolet, Ford and other models.

Thermostats

A car thermostat is a device that controls the temperature inside your car. Its working principle is to sense the temperature inside the car through sensors and automatically adjust according to the preset temperature value. We provide more than 1|000 SKUs of automotive thermostats on the market, covering Volkswagen, Audi, BMW, Honda, Toyota, Nissan, Chevrolet, Ford and other models.

Coolant Expansion Tank Bottle

The function of the automobile expansion pot is to discharge the gas in the cooling system, and to replenish the cooling system with coolant accordingly. By increasing the pressure of the cooling system, the pressure of the water pump is increased, and it is also to prevent the hazards of water pump cavitation.

Intercoolers

The main function of the car intercooler is to reduce the temperature of the air entering the engine, thereby improving the engine's ventilation efficiency. It is particularly suitable for cars equipped with turbochargers, since turbocharging increases the temperature of the air and reduces its density. We provide more than 800 types of vehicle intercoolers on the market, covering Volkswagen, Audi, BMW, Honda, Toyota, Nissan, Chevrolet, Ford and other models.

Evaporators

The automobile evaporator is a vital component in the automobile air conditioning system. Its main function is to exchange heat with the outside air, liquefy and absorb heat, and achieve the cooling effect. ‌ We provide more than 500 models of evaporators on the market, covering Volkswagen, Audi, BMW, Honda, Toyota, Nissan, Chevrolet, Ford and other models.